LTL 101:Hazards and DOT Guidelines

The U. S. Department of Transportation (DOT) has specific rules for shipping hazardous materials. SunteckTTS can help you determine the DOT hazardous class for your shipment and find contract freight carriers that meet DOT safety and transportation requirements. 

Hazardous materials are defined by the U. S. Department of Transportation in accordance with the Federal Hazardous Material Law regulations. A DOT hazardous material classification is applied if a material, in a particular amount and form, poses an unreasonable risk to health, safety or property. 

Below is the list of DOT hazard classes:

DOT Hazard Class 1: Explosives.

Division 1.1: Explosives with a mass explosion hazard
Division 1.2: Explosives with a projection hazard
Division 1.3: Explosives with predominantly a fire hazard
Division 1.4: Explosives with no significant blast hazard
Division 1.5: Very insensitive explosives
Division 1.6: Extremely insensitive explosive articles

DOT Hazard Class 2: Gases.

Division 2.1: Flammable gases
Division 2.2: Non-flammable gases
Division 2.3: Poison gases
Division 2.4: Corrosive gases

DOT Hazard Class 3: Flammable liquids.

Division 3.1: Flashpoint below -18°C(0°F)
Division 3.2: Flashpoint below -18°C and above, but less than 23°C(73°F)
Division 3.3: Flashpoint 23°C and up to 61°C(141°F)

DOT Hazard Class 4: Flammable solids, spontaneously combustible materials, and materials that are dangerous when wet.

Division 4.1: Flammable solids
Division 4.2: Spontaneously combustible materials
Division 4.3: Materials that are dangerous when wet

DOT Hazard Class 5: Oxidizers and organic peroxides.

Division 5.1: Oxidizers
Division 5.2: Organic peroxides

DOT Hazard Class 6: Poisons and etiologic materials.

Division 6.1: Poisonous materials
Division 6.2: Etiologic (infectious) materials

DOT Hazard Class 7: Radioactive material.

Any material, or combination of materials, that spontaneously gives off ionizing radiation. It has a specific activity greater than 0.002 microcopies per gram.

DOT Hazard Class 8: Corrosives.

A material, liquid or solid, that causes visible destruction or irreversible alteration to human skin or a liquid that has a severe corrosion rate on steel or aluminum.

DOT Hazard Class 9: Miscellaneous dangerous substances and articles.

A material that presents a hazard during transport, but which is not included in another hazardous freight classification.

ORM-D: Other regulated material.

A material that, although otherwise subjected to regulations, presents a limited hazard during transportation due to its form, quantity and packaging.

In order to avoid any issues while booking HAZMAT loads please contact your local SunteckTTS agent so that they can insure your BOL is set up correctly and you have classified your hazardous materials properly with the correct UN Number, Shipping Name, Description, Group, Class and Placard Type.  

0 comments