LTL 101:Freight Classifications

It is VERY important you understand freight class. If you incorrectly classify your item to be shipped it can be reclassified by the freight carrier. Disputing this is difficult, time consuming and you will be charged the difference (usually without a discount).

The National Motor Freight Classification® (NMFC®) is a standard that provides a comparison of commodities moving in interstate, intrastate and foreign commerce. Commodities are grouped into one of 18 classes—from a low of class 50 to a high of class 500—based on an evaluation of four transportation characteristics: density, stow-ability, handling, and liability. Together, these characteristics establish a commodity’s “transportability.”
 
By analyzing commodities on the basis of the four transportation characteristics and ONLY on the basis of those characteristics, the NMFC provides both carriers and shippers with a standard NMFC number or code by which to begin negotiations and greatly simplifies the comparative evaluation of the many thousands of products moving in today’s competitive marketplace.

If you don’t have an NMFC number/code listed on your BOL, there is a good possibility that your freight will be reclassified. Some carriers will assign an arbitrary class if there is no code listed on the BOL, often outlined in a carrier’s rules tariff. This, along with the proper code, will greatly reduce the possibility of additional reclass charges.

Don’t forget we are participants of the National Motor Freight Traffic Association which means we have access to multiple ways of obtaining the correct NMFC number/code for your shipments. If you have any questions or doubts regarding your product’s freight class, please reach out to the LTL Team.

0 comments

Training Tuesday:Consistency

There are a million sales tips and “tricks” out there designed to help you become a better salesperson, but you may find the biggest key to long term success is consistency. You must be consistent – create a routine of practicing your sales presentation, prospecting, maintaining relationships with existing clients, and pitching to potential customers. If you do not do these things regularly, you can’t guarantee that you will have reliable sales numbers.

If you can consistently practice your sales presentation, you can make the presentation itself more consistent based on what works in real sales situations and you can continue to fine tune it. If you don’t practice and instead rely on charisma and “winging it,” you cannot necessarily reproduce an effective sales pitch. Without a dependable sales presentation, the level of success you can expect from a prospect in a sales interaction varies widely.

Having a steady sales pipeline also relies on consistent prospecting and interactions with existing customers. If you don’t spend ample time each day or week prospecting, it doesn’t matter how stellar your sales presentation is, because you won’t have a potential customer to share it with. You must also maintain relationships with your existing customers, both to help prevent them from leaving for the competition and to increase your chances of successful referrals to their contacts who may need your services.

Consistency is key – that may be a cliché, but it certainly applies to sales. It is crucial that you put in reliable work and effort in order to create and maintain a steady rate of sales success.

0 comments

LTL 101:Unexpected Charges for LTL Loads

It is important to educate shippers and consignees so they know what to expect at the time of pick-up and delivery, but it is equally as important to remind them of potential unexpected charges and things to watch out for when shipping an LTL load.

Did you know that many customers get invoiced at a much higher rate due to their shipments being “hit” with Cubic Capacity, Exceeds Linear Feet, or Oversize Dims? All three of these things are different and very expensive so pay close attention to what your customer is shipping.

Cubic Capacity
This is when a shipment is greater than 750 cubic feet and an average density of 6 or less (some carriers are 4 or less).

  • Example of a Cubic Capacity load:
    • 6 Pallets at 2600 lbs., each pallet is 48x48x55, cubic feet is 768, and the density is only 5.91
  • This shipment would get “hit” with cubic capacity without a quote.

Linear Foot Rule
Each carrier has their own version of the linear foot rule. If your shipment equals more than the LTL linear foot rule for that carrier then it will get “hit” with the “exceeds linear feet” fee.

  • Example of Linear Foot load:
    • 5 pallets at 5000 lbs., each pallet is 49x49x50, and because the pallets cannot be placed side by side this shipment takes up a little more than 20’ of space

Oversize
Each carrier has an over dimension rule; most LTL carriers are 12′. The oversize accessorial should be applied to any shipment 12’ or more. You can find the “Linear Foot Rule” for most carriers by looking at their carrier tariff on their websites.

0 comments

Community Involvement:Proud Corporate Partner of Truckers Against Trafficking

SunteckTTS is proud to be a corporate partner of Truckers Against Trafficking (TAT), an organization that proactively trains truck drivers to help spot, stop, and prevent human trafficking.

Human trafficking is defined as recruiting, holding or transporting people into a “situation of exploitation through the use of violence, deception, or coercion and forced to work against their will”. Victims of human trafficking include men, women, and children, who are involuntarily used for labor or sex work.

Those who are victims of trafficking are often drugged, coerced, or physically forced to participate in unsafe and illegal activities, which can create a cycle of fear, dependence, and violence that can be almost impossible to escape from without assistance.

We are proud to be a sponsor for an organization that is working to help reduce human trafficking through a national program for education and empowerment of those in a unique position to help those who have been trafficked. Truckers Against Trafficking works to educate members of a group that is often exposed to victims of sex trafficking, and to empower truckers to recognize and report suspicious activity and suspected cases of human trafficking.

The training provided by TAT covers how to recognize possible instances of human trafficking, what action to take, and to whom and how they should report the situations and people they encounter. This training empowers truck drivers to take immediate and concrete action that has, in many situations, led to investigations and convictions of traffickers and the rescue of their victims or intended victims.

About Truckers Against Trafficking

Truckers Against Trafficking (TAT) is a 501(c)3 non-profit that exists to educate, equip, empower and mobilize members of the trucking and busing industries to combat human trafficking. You can read more about the TAT mission at www.truckersagainsttrafficking.org

0 comments

LTL 101:Pick-Up and Delivery Tips

Pick-Ups:

  • Any pick-up (P/U) entered after 2:30 PM local time should be called into the carrier to insure availability, otherwise the request will roll over to the next day
  • Lift Gate P/Us must be called into the carriers because Lift Gates are not readily available at every terminal
  • All Container Freight Stations and Airline P/Us require Delivery Order and Entry paperwork (3416 document), these need to be sent 24 hours in advance because drivers will need these documents in hand prior to P/U
  • P/Us are not Guaranteed
  • All carriers require a 2 hour window for P/Us
  • P/Us are done in the afternoon because drivers have to deliver freight before they can start pickups
    • If your shipper needs an AM P/U it is best practice to call the carrier to set something up which will most likely incur additional charges
  • The shipper must have our system generated BOL to provide to the driver at the time of P/U or our rates will not apply
    • This is not something the carrier will have via our P/U requests in BTMS
  • If an LTL driver needs to reference a P/U number, it is best practice to put that number on the first line of the shipper name. Please see the example below:

           ABC Distribution Co > Ref # 123456

           4567 Main Street

           Anywhere, NY 10014

Deliveries: 

  • Transit times and delivery dates are estimations and can be delayed for many reasons
    • Add an additional day if a shipment is interlined
    • Add 2-3 days if a shipment is traveling by rail
  • Stress to your customers, if the shipment must be delivered by a certain date and time, spend the extra money and have a the shipment guaranteed
    • If “Guaranteed” is not on the BOL at time of P/U no adjustments can be made to the invoice
  • Volume Shipments cannot be Expedited or Guaranteed
  •  Re-delivery Rates are based on weight and can get very pricey

It is imperative to make sure the consignee is ready to accept the freight so that additional charges are not incurred

0 comments

Training Tuesday:Problem Solving

Being able to solve problems for your customers is one of the most important skills you can have as a sales person. Solving problems will require time, thought, and individual attention, but once you have a set of skills in place, you can begin to handle problems quickly, easily, and consistently.

The first step should always be to actively listen to what they’re saying. If you don’t understand the question the customer is asking, how can you expect to provide a helpful solution or answer? You should make every effort to clarify their question, problem, or objection before you even start to formulate a solution. In the clarification process, hopefully your prospect or customer will give you additional details that can help you solve their problem.

After you have defined the problem, you can begin to brainstorm solutions and identify options. Once you have a list of options, you’re better equipped to determine what will actually work for a particular customer and situation.

After you’ve come up with a viable solution, you should answer the question head on, honestly, simply, and succinctly. Present the solution and then, if accepted, implement it efficiently.

0 comments

LTL 101:Reconsignment and Fees

Reconsignment – Here’s a shipping term that you might be familiar with if you’ve ever had a change of plans with your freight. A reconsignment happens when freight that is already in transit is re-directed from one delivery location to another. This charge can vary based on how far apart the delivery locations are. For instance, if the new location is just down the street, the charge will probably be minimal. However, if freight was heading to California and is being reconsigned to Florida, you will be in for a hefty reconsignment fee.

We get a lot of groans when we have to quote people for the cost of a reconsignment so we wanted to highlight the process so you can educate your customers as well:

  1. We have to send written authorization to make the change to the carrier. A Bill of Lading is a legal contract, so any changes made must be in writing. Authorization must be made by the shipper or paying party always.
  2. The carrier will enter the information into their online system and image your authorization.
  3. A rating analyst reviews the request, verifies that we have authorization to make the change, and completes the request.
  4. Notification is sent to the terminal who currently has, or if it is in transit, who will have the freight.
  5. New labels have to be generated and put on the freight.

Typically, your charges end up being broken down into the cost from origin to reconsignment point, and reconsignment point to new destination, and fees for marking and tagging of the freight. If your freight has to backtrack, you will pay for every mile it has traveled.

GREAT EXAMPLE: If it was originally to go from NY to CA, but then once it reached Chicago you turned it back around to PA, you are paying NY to Chicago and Chicago to PA, not just NY to PA.

Important points to note as well:

  • If you are not the shipper or paying party, you cannot use your authorization to make changes to the BOL.
  • If your name doesn’t appear anywhere on the BOL, see #1 above.
  • If the driver arrives and you say that it needs to go to a different address across town, this constitutes both reconsignment AND redelivery. And it can’t be done without authorization, as above.

This process actually represents a significant amount of labor time and fuel. Even a local reconsignment (change in address within a local terminal service area) requires these steps.

All carriers want to make money on this deal. Nothing is done at cost.

But time is money, and the cheapest option is to always do it right the first time.

0 comments

Training Tuesday:Structuring the Sales Call

Without structure to the sales call, a salesperson is just a tourist. In order to have a successful sales call, you must stay organized and on-track. That means planning and structuring your visit to a prospect so that you can get the most out of each call. Below are our top things to keep in mind when planning a sales call:

  • The pre-call objective/setting an objective for every call. You should set an objective or goal for every call. This gives you direction for the actual sales tactics that will be most effective.
  • Make your goal specific. It is important to remember to set specific and reasonable goals so that you can accomplish them without being overwhelmed.
  • Be focused AND flexible. Yes, this really is possible! It’s important to not allow your focus to cloud your ability to flex and adjust the sales presentation to the reactions and needs of the prospect.
  • Ask the customer for feedback. You can ask specific questions here, like “Did I cover everything sufficiently?” or “Would you like more details on anything we’ve discussed?”
  • Ask for the business. You will reach a point in the sales call where it is not only reasonable, but expected, to ask the prospect for their business. You cannot avoid this step and consider it a successful call. You must ask for the business you want.

Remember it is just as important to set goals and plan your sales visit to a previously visited a prospect as it is to plan for a first impression. Every visit to a prospect or customer makes a lasting impression about you and the company you are representing. Plan, set goals, and succeed!

0 comments

LTL 101:Drop Trailers Overview

From time to time you may run into a drop trailer with one of your LTL shipments.

A drop trailer is a trailer that is left at a location for an indeterminate amount of time. It’s “dropped,” and picked up later. Most of the time, a drop trailer is used at locations that ship or receive often enough to fill up or unload a full trailer in a week or even a day, depending on production. The location doesn’t matter as much as the amount of freight that is moving in or out of the specified location and the agreement in place with each LTL carrier.

Think about it like this: Let’s say you have a shipment going to a warehouse that multiple manufactures ship to as well. This warehouse has pre-established relationships with a handful of LTL carriers. In order to save time and money they will consolidate and reduce traffic flow to their receiving docks by collaborating with LTL carriers and advise them to only “drop” a trailer at their location when the LTL carrier has a full trailer. This could potentially delay your expected delivery date.

There are numerous ways in which the LTL carriers can handle a drop trailer situation, but the main thing to keep in mind is that your shipment may not deliver on time due to it being a drop trailer which may also change the way in which the PODs are received from the consignee. Due to the nature of drop trailers, PODs are usually handled differently and will almost always take longer to receive considering the consignee is unloading a full trailer of shipments from multiple shippers.

Though the use of drop trailers isn’t exactly common, it’s not something to be afraid of when it comes to your LTL shipments. A little understanding goes a long way. Here are some things to keep in mind when dealing with drop trailers:

Drop trailers can sometimes lead to delays. Before you panic about delays, remember that the manufacturer is often very aware a drop trailer is being used, and so should the buyer. Don’t be afraid to ask if the shipper or consignee have any drop trailer processes in place so you can educate your customer as well. Most drop trailer situations do not revolve around freight that is time-sensitive. If your freight is on a tight schedule, make sure to use a different carrier.

Not all carriers do drop trailers. Just because one carrier uses a drop trailer at a certain location doesn’t mean that EVERY carrier uses a drop trailer there. Trailers belong to carriers, so if you can’t afford to have a drop trailer on a shipment, simply look at using a different carrier. It may not be the cheapest of the bunch, but there will always be options available.

Stay away from perishables. For obvious reasons, if you’re shipping perishable items, make sure you’re not dealing with drop trailers.

0 comments

Training Tuesday:Sales Pitching and Silence

Often the most important part of your sales pitch is when you are completely silent. We often rush through all the great benefits of why a customer would buy, without really listening to them tell us what they need and why they might buy from us.

Most people hate mimes. Why do they exist? Are they evil? If a tree falls on a mime does he make a sound? But, silence is the one important sales attribute that mimes demonstrate in abundance. So, on your next sales call, be a mime, at least for part of the call. Silence just may turn out to be the most important piece of the sales puzzle.

Why is it that so many salespeople think they must tell everything they know before allowing the prospect to talk? Why is it that some think the sales process involves a lot of talking when, in reality, the most successful salespeople do more listening than talking? It’s a fact that the more we listen, the more we can learn about our prospects and the easier we can find their “hot buttons.”  It’s not what we say that makes the sale, it’s what we can get the prospect to say.

Begin With Questions

Think about how many times you launch right into your presentation thinking you know what the prospect wants. Sometime later, often too much later, you find you’re on the wrong track. The prospect has an entirely different need – one you might have uncovered by asking open-ended questions that required more than a yes or no response. Then you could have focused on what the customer wanted instead of what you had to sell. Stop thinking so much about what you are going to say and concentrate on what the prospect is telling you.

It’s a paradox: the more we try to tell the prospect up front, the more barriers we create to the purchase. However, the more we listen to why he or she wants to buy, the more we can tailor our delivery to providing very specific information concerning how our product or service fits his or her needs.

Ask More Questions

The opening question is merely the first in a series of questions that guide the dialogue. It’s an approach as old as the art of miming. If we want to involve someone – the first step in convincing that person – every comment we make should end with a question that solicits more information. The person asking questions is the person controlling the direction of the dialogue. The one who is talking is providing information that helps the other adjust the direction.

After you ask a question, however, don’t be too anxious to fill the silence. Let the silence work in your favor. Too often we answer the question for the prospect by jumping in and providing him with an objection:

“Perhaps you don’t like the price,” or, “Maybe you don’t like the resources it would involve.”

Beware of the very real temptation to fill in the silence with a product weakness – the one we are most worried about.

Don’t Rush In With Answers

Salespeople have a terrible tendency to try to get their point in as soon as the customer stops talking. Think about how often you find yourself stepping on your prospect’s last words, rushing in right after the prospect has finished making a point.

Salespeople can break themselves of this self-defeating habit by training themselves to wait several seconds after the customer has stopped talking before they begin. That gives you ample time to think about your response and answer in a way that reflects the customer’s concerns.

Get in the habit of paraphrasing what the prospect has said. This will accomplish two things. One, it reduces the likelihood of misunderstanding what was said, and two, it boosts the prospect’s ego. People like to hear their thoughts repeated – it makes them feel like what they said was important.

Learn to Listen

Don’t listen with just with your ears. Listen with your eyes and your entire body. Use body language that shows you are paying more attention, and your listening habits will automatically improve. Lean forward intently, look the prospect in the eye, and focus on the valuable information you are hearing.

And finally, listen for buying signals. You’ll never notice a buying signal from the customer when you’re doing the talking. Sure, we want to talk so the prospect will learn how smart we are. But the prospect only really knows how smart we are when we’ve “listened” to the information he or she wants to share.

0 comments