Search

Tag: TRUCKING

LTL 101:Billing Accuracy

Posted 6 years ago

Many shippers have expressed concern about accuracy of billing by LTL carriers. Having pushed the LTL carriers to be more vigilant with making corrections for weight and other aspects of shipments for proper revenue capture, SJ Consulting researched the validity of such perception by conducting an extensive survey with several large LTL shippers, 3PLs, and freight audit and pay firms, with particular thanks to Williams & Associates. The freight charges on LTL shipments by these companies exceed $8 billion over a 12­ month period, representing 22 percent of the total industry revenue. For decades, the LTL industry has relied on an honor system for shippers to provide true characteristics of their shipments, required to accurately bill the customers for their shipments.

The survey found range of billing accuracy was 94 to 99 percent depending on the carrier, with the average being 97 percent. The most interesting revelation of the survey was that what shippers perceive as a billing error actually is due to shippers providing an estimated weight or freight class for dimensional attributes of their shipment that are corrected on more shipments as more LTL carriers deploy scales and dimensional machines. Given that about 50% of bills of lading have errors in weight or description of the shipment, it’s no surprise that a correct invoice from a LTL carrier can get perceived as a billing error.

Despite shippers’ perception, the LTL industry has an impressive record in billing accuracy, and it is finally converting rapidly from an honor system.

0 comments

LTL 101:Clean BOLs

Posted 6 years ago

When shipping LTL freight, you must make sure your BOLs are clean and precise prior to sending them to your shippers. Extra language in the special instructions section of BOLs only causes billing issues. Take a look at the below examples where the BOLs are very busy and not easily readable:

  • Let’s stop putting so much traffic in the special instructions!
  • PU# is fine, but not 3 times
  • PU instructions FCFS is not needed and does not protect you or the customer from charges
    • If the carrier is delayed due to the shipper you will be charged regardless
    • If they can’t get in timely or for another reason they will skip the pick-up
  • “No APT needed for LTL shipments” –  This is unnecessary information because if the consignee states appointment is needed it will be assessed
    • The carrier already assumes appointment is not needed.
    • This includes daily routines between consignee and carrier
      • If a consignee isn’t always open during regular business hours, some LTL carriers will have that particular address flagged for appointments no matter what we have on the BOL
  • Headings: “BOL SPECIAL INSTRUCTIONS:” “PICKUP DIRECTIONS” “PICKUP NOTES” “PICKUP INSTRUCTIONS” “DELIVERY INSTRUCTIONS”  should be consolidated or removed all together

  • Again, “FCFS DELIVERY” is not needed and does not protect you or the customer from charges
  • “1000-1600” – By putting hours on the BOL, some carriers may flag the shipment for an appointment because standard LTL operating hours will always be assumed
    • If the carrier’s cut time from the terminal is 8am and this consignee is close to the terminal then this should be flagged because they would have to wait 2 hours prior to attempting delivery
  • “MUST CALL” – This verbiage may be mistaken for notify or an appointment because some LTL billing clerks may not catch the remaining portion due to the busyness of the BOL

  • “No additional accessorial will be approved without prior authorization” – This wording is irrelevant because the carrier will always charge based on their rules tariff and/or contract with the paying party

Now that you have cleaned up your BOL, you can’t stress enough to your customer:
“Make sure this BOL is handed to the carrier so that no additional charges occur!”

0 comments

LTL 101:Pick-ups and Deliveries

Posted 6 years ago

This week we are covering some of our top tips for easy, efficient, and cost-effective pick-up and delivery tips.

Pick-Ups:

  • Any pick-up (P/U) entered after 2:30 PM local time should be called into the carrier to insure availability, otherwise the request will roll over to the next day
  • Lift Gate P/Us must be called into the carriers because Lift Gates are not readily available at every terminal
  • All Container Freight Stations and Airline P/Us require Delivery Order and Entry paperwork (3416 document), these need to be sent 24 hours in advance because drivers will need these documents in hand prior to P/U
  • P/Us are not Guaranteed
  • All carriers require a 2 hour window for P/Us
  • P/Us are done in the afternoon because drivers have to deliver freight before they can start pickups
    • If your shipper needs an AM P/U it is best practice to call the carrier to set something up which will most likely incur additional charges
  • The shipper must have our system generated BOL to provide to the driver at the time of P/U or our rates will not apply
    • This is not something the carrier will have via our P/U requests in BTMS
  • If a LTL driver needs to reference a P/U number, it is best practice to put that number on the first line of the shipper name. Please see the example below:

ABC Distribution Co > Ref # 123456

4567 Main Street

Anywhere, NY 10014

 

Deliveries: 

  • Transit times and delivery dates are estimations and can be delayed for many reasons
    • Add an additional day if a shipment is interlined
    • Add 2-3 days if a shipment is traveling by rail
  • If the shipment must be delivered by a certain date and time, spend the extra money and have the shipment guaranteed
    • If “Guaranteed” is not on the BOL at time of P/U no adjustments can be made to the invoice
  • Volume Shipments cannot be Expedited or Guaranteed
  •  Re-delivery rates are based on weight and can get very pricey

 

It is imperative to make sure the consignee is ready to accept the freight so that additional charges are not incurred.

0 comments

LTL 101:Delivery Expectations & PODs

Posted 6 years ago

Last Blog we discussed educating our shippers in order to ensure our BOL is set up correctly and to avoid a possible dispute with the carrier regarding our invoice. This week we want to discuss educating our consignees so they know what to expect at the time of delivery.

It is very important to educate your consignee BEFORE the freight is delivered about what the process will be like. Will they need a liftgate? Will the driver be helping unload the freight in any form or manner? By asking these questions in advance, and by making sure that the consignee and you are on the same page, you can minimize additional charges on your invoice.

On the delivery receipt/proof of delivery (POD), issues should be noted if you suspect that the value of the product has been compromised. Make sure to note any damage to the packaging, and/or missing product. Having these notes on the POD makes it easier to file a freight claim with the carrier. Claims can take quite a long time so anything that you can do upfront saves time down the road.

Another tactic you can take is to refuse the shipment upon delivery if damage is present. Refusing a shipment means that the consignee does not accept the freight in the condition presented – meaning you will eventually file a damage claim. This will alert the carrier that something is wrong with the shipment and that they should get in touch with the appropriate party. Make sure you use this tactic responsibly, because if a shipment is not damaged the carrier can actually tack on a redelivery fee. Yikes!

Five of the most common additional services on a POD include:

  1. Lift Gate – Hydraulic lift on the rear of a truck used to assist in the unloading of freight.
  2. Inside Delivery – The driver is only responsible for moving the freight off the truck. If the driver helps move the freight more than a few feet away from the truck, even if it’s not “inside,” then an Inside Delivery fee may apply. Be very careful with this one because the terminology can be misleading and it varies by carrier.
  3. Limited Access (Residential) – This is up to the carrier’s discretion, however, there are locations that will always be deemed limited access. If a business is run from a home, or is in a residential area, carriers may charge this fee.
  4. Sort/Segregate – Certain locations may require a carrier to sort and segregate a shipment. This is additional handling beyond the normal duties of a driver that will incur additional fee(s). This charge is especially prevalent in grocery stores or distribution centers.
  5. Detention – With most LTL carriers, the first 30 minutes from when the driver arrives are free. Any additional time is subject to an additional detention fee. Again, the length of this “free time,” and the charge it carries, varies by carrier.

So the next time you sign a POD when receiving your shipment, be sure to review it and see if any additional services listed are being used. If a service is pre-printed on the POD, then the need for this service was most likely known in advance. However, if the driver marks that an additional service was performed, then there will be an additional charge. In some cases, it may be good practice to have your consignee obtain a copy of the POD themselves.

0 comments

Training Tuesday:Mentors and Joint Sales

Posted 6 years ago

Mentors are an important part of becoming a successful salesperson. A mentor or helper could be a co-worker, manager, or someone in a similar field. Find a mentor who can offer advice, tips, experience and suggestions for improving your sales skills.

Here’s a short list of our tips for getting the most from a relationship with a mentor:

Brainstorm. Sometimes you get so immersed in a sale that you can’t see the forest for the trees. Some of the best ideas and proven sales techniques come from a simple conversation. Open the conversation with a simple comment like, “Tell me about your best sales call,” or, “What do you say on a sales call that always seems to work?”

Have a game plan. Based on your personal styles, or the nature of a particular sale, determine in advance the roles that you and your partner will play in each sales call you make together, whether in person or not. You can have your mentor/helper make a follow-up phone call to your customer and ask how you did, if you asked the right questions, and if you provided a real solution. Team selling is one of the most effective ways to approach customers and a great way to close more sales.

Learn. When you go on a sales call with a proven sales professional, be sure to keep your eyes and ears open. Study their selling techniques. Pick out things they say that fit your style, and then use them on your next sales call.

Be selective. Use your sales mentor to your best advantage on difficult sales calls or for negotiations where you are at a stalemate. For some reason, you may not click with a particular customer, but your mentor may be the key you need.

Try making a joint sales call with your mentor today!

0 comments

LTL 101:Reconsignment

Posted 6 years ago

Reconsignment – Here’s a shipping term that you might be familiar with if you’ve ever had a change of plans with your freight. A reconsignment happens when freight that is already in transit is re-directed from one delivery location to another. The charges associated with this can vary based on how far apart the delivery locations are. For instance, if the new location is just down the street, the charge will probably be minimal. However, if freight was heading to California and is being reconsigned to Florida, you will be in for a hefty reconsignment fee.

We get a lot of groans when we have to quote people for the cost of a reconsignment so we wanted to highlight the process so you can educate your customers as well:

1.We have to send written authorization to make the change to the carrier. A Bill of Lading is a legal contract, so any changes made must be in writing. Authorization must always be made by the shipper or paying party.

2.The carrier will enter the information into their online system and image your authorization.

3.A rating analyst reviews the request, verifies that we have authorization to make the change, and completes the request.

4. Notification is sent to the terminal who currently has, or if it is in transit, will have the freight.

5.New labels have to be generated and put on the freight.

Typically, your charges end up being broken down into the cost from origin to reconsignment point, and reconsignment point to new destination, and fees for marking and tagging of the freight. If your freight has to backtrack, you will pay for every mile it has traveled.

GREAT EXAMPLE: If it was originally to go from NY to CA, but then once it reached Chicago you turned it back around to PA, you are paying NY to Chicago and Chicago to PA, not just NY to PA.

Important points to note as well:

  • If you are not the shipper or paying party, you cannot use your authorization to make changes to the BOL.
  • If your name doesn’t appear anywhere on the BOL, see #1 above.
  • If the driver arrives and you say that it needs to go to a different address across town, this constitutes both reconsignment AND redelivery. And it can’t be done without authorization, as above.

This process actually represents a significant amount of labor time and fuel. Even a local reconsignment (change in address within a local terminal service area) requires these steps.

All carriers want to make money on this deal. Nothing is done at cost. But time is money, and the cheapest option is to always do it right the first time.

0 comments

LTL 101:Drop Trailers

Posted 6 years ago

From time to time you may run into a drop trailer with one of your LTL shipments.

A drop trailer is a trailer that is left at a location for an indeterminate amount of time. It’s “dropped,” and picked up later. Most of the time, a drop trailer is used at locations that ship or receive often enough to fill up or unload a full trailer in a week or even a day, depending on production. The location doesn’t matter as much as the amount of freight that is moving in or out of the specified location and the agreement in place with each LTL carrier.

Think about it like this: Let’s say you have a shipment going to a warehouse that multiple manufacturers ship to as well. This warehouse has pre-established relationships with a handful of LTL carriers. In order to save time and money they will consolidate and reduce traffic flow to their receiving docks by collaborating with LTL carriers and advise them to only “drop” a trailer at their location when the LTL carrier has a full trailer. This could potentially delay your expected delivery date.

There are numerous ways in which the LTL carriers can handle a drop trailer situation, but the main thing to keep in mind is that your shipment may not deliver on time due to it being a drop trailer which may also change the way in which the PODs are received from the consignee. Due to the nature of drop trailers, PODs are usually handled differently and will almost always take longer to receive considering the consignee is unloading a full trailer of shipments from multiple shippers.

Though the use of drop trailers isn’t exactly common, it’s not something to be afraid of when it comes to your LTL shipments. A little understanding goes a long way. Here are some things to keep in mind when dealing with drop trailers:

Drop trailers can sometimes lead to delays. Before you panic about delays, remember that the manufacturer is often very aware a drop trailer is being used, and so should the buyer. Don’t be afraid to ask if the shipper or consignee have any drop trailer processes in place so you can educate your customer as well. Most drop trailer situations do not revolve around freight that is time-sensitive. If your freight is on a tight schedule, make sure to use a different carrier.

Not all carriers do drop trailers. Just because one carrier uses a drop trailer at a certain location doesn’t mean that EVERY carrier uses a drop trailer there. Trailers belong to carriers, so if you can’t afford to have a drop trailer on a shipment, simply look at using a different carrier. It may not be the cheapest of the bunch, but there will always be options available.

Stay away from perishables. For obvious reasons, if you’re shipping perishable items, make sure you’re not dealing with drop trailers.

0 comments

Training Tuesday– Silence and Sales Listening

Posted 6 years ago

Often the most important part of your sales pitch is when you are completely silent. We often rush through all the great benefits of why a customer would buy, without really listening to them tell us what they need…why they might buy from us. Silence is often uncomfortable and we feel the need to fill the space, but silence is often one of the most important pieces of the sales puzzle.

It’s not what we say that makes the sale, it’s what we can get the prospect to say.

Begin with Questions

Think about how many times you launch right into your presentation thinking you know what the prospect wants. Sometime later, often too much later, you find you’re on the wrong track. The prospect has an entirely different need – one you might have uncovered by asking open-ended questions that required more than a yes or no response. Then you could have focused on what the customer wanted instead of what you had to sell. Stop thinking so much about what you are going to say and concentrate on what the prospect is telling you.

It’s a paradox: the more we try to tell the prospect up front, the more barriers we create to the purchase. The more we listen to why he or she wants to buy, the more we can tailor our delivery to providing very specific information concerning how our product or service fits his or her needs.

Ask More Questions

The opening question is merely the first in a series of questions that guide the dialogue. If we want to involve someone – the first step in convincing that someone – every comment should end with a question that solicits more information. After you ask a question, let the prospect answer, don’t be too anxious to fill the silence.

Don’t Rush in with Answers

Break yourself of the habit of jumping in too quickly after the prospect finishes. Instead, train yourself to wait several seconds after the customer has stopped talking before they begin. That gives you ample time to think about your response and answer in a way that reflects the customer’s concerns.

Get in a habit of paraphrasing what the prospect has said. This reduces the likelihood of misunderstanding what was said, and it boosts the prospect’s ego.

Learn to Listen

You need to learn to listen with your eyes, ears, and entire body. Use body language that shows you are paying close attention and your listening habits will automatically improve.

And finally, listen for buying signals. You’ll never remember a buying signal from the customer when you’re doing all the talking.

0 comments

LTL 101:Shipping Hazardous Materials

Posted 6 years ago

The U. S. Department of Transportation (DOT) has specific rules for shipping hazardous materials. SunteckTTS can help you determine the DOT hazardous class for your shipment and find contract freight carriers that meet DOT safety and transportation requirements.

Hazardous materials are defined by the U. S. Department of Transportation in accordance with the Federal Hazardous Material Law regulations. A DOT hazardous material classification is applied if a material, in a particular amount and form, poses an unreasonable risk to health, safety or property.

Below is the list of DOT hazard classes:

DOT Hazard Class 1: Explosives.

Division 1.1: Explosives with a mass explosion hazard
Division 1.2: Explosives with a projection hazard
Division 1.3: Explosives with predominantly a fire hazard
Division 1.4: Explosives with no significant blast hazard
Division 1.5: Very insensitive explosives
Division 1.6: Extremely insensitive explosive articles

DOT Hazard Class 2: Gases.

Division 2.1: Flammable gases
Division 2.2: Non-flammable gases
Division 2.3: Poison gases
Division 2.4: Corrosive gases

DOT Hazard Class 3: Flammable liquids.

Division 3.1: Flashpoint below -18°C(0°F)
Division 3.2: Flashpoint below -18°C and above, but less than 23°C(73°F)
Division 3.3: Flashpoint 23°C and up to 61°C(141°F)

DOT Hazard Class 4: Flammable solids, spontaneously combustible materials, and materials that are dangerous when wet.

Division 4.1: Flammable solids
Division 4.2: Spontaneously combustible materials
Division 4.3: Materials that are dangerous when wet

DOT Hazard Class 5: Oxidizers and organic peroxides.

Division 5.1: Oxidizers
Division 5.2: Organic peroxides

DOT Hazard Class 6: Poisons and etiologic materials.

Division 6.1: Poisonous materials
Division 6.2: Etiologic (infectious) materials

DOT Hazard Class 7: Radioactive material.

Any material, or combination of materials, that spontaneously gives off ionizing radiation. It has a specific activity greater than 0.002 microcopies per gram.

DOT Hazard Class 8: Corrosives.

A material, liquid or solid, that causes visible destruction or irreversible alteration to human skin or a liquid that has a severe corrosion rate on steel or aluminum.

DOT Hazard Class 9: Miscellaneous dangerous substances and articles.

A material that presents a hazard during transport, but which is not included in another hazardous freight classification.

ORM-D: Other regulated material.

A material that, although otherwise subjected to regulations, presents a limited hazard during transportation due to its form, quantity and packaging.

 

In order to avoid any issues while booking HAZMAT loads please contact your local SunteckTTS agent so that they can insure your BOL is set up correctly and you have classified your hazardous materials properly with the correct UN Number, Shipping Name, Description, Group, Class and Placard Type.

0 comments

Training Tuesday:Questions for the Sales Call

Posted 6 years ago

Knowing the questions you’re going to ask before you arrive at the customer’s desk or get them on the phone is essential to a productive sales call. The information you can collect from the customer through asking targeted questions with increase your chances of putting together a winning proposal after you’ve made your consultative sales call. You won’t have the opportunity to ask all of the questions outlined below, but over time the information you secure will allow you to earn more and more of your customer’s business.

Some of our best questions are below:

What does your company specialize in? Manufacturing? Distribution?

What do you ship? In what quantities? Expedited? Truckload? LTL? Intermodal?

In what lanes do you ship, and how often?

What is the average value of each shipment? Would you be interested in our ability to purchase affordable shipper’s insurance?

What service level is required? To where?

How is your product packaged? Palletized? Shrink wrapped? What is the average weight of each shipment?

What is the normal pick up time? Do you have any unusual pickup requirements?

What is the frequency of your shipments?

What is your average monthly cost for freight transportation?

How do you feel about your current freight transportation service? Pricing? Efficiency?

Would you benefit from adding shipping services that are not available with your current broker, carrier, or 3PL?

What services would you most like to add? What is the benefit?

What is most important to you: service, stability, technology, or something else? Why?

What would cause you to begin using a different carrier or broker?

 

After asking some of the above questions, be sure to wrap up the appointment by asking for the next appointment and initiating a trial close. The trial close, something like “I’d like to prepare a customized program for your company. Would you be able to commit to giving us a shot to prove that we can offer the kind of service you need?” lets the prospect know that your next call will include more of a sales push. It prepares them to say “yes” when you come back later and ask them to buy.

Good questions lead to profitable answers!

0 comments

JACKSONVILLE HEADQUARTERS 4500 Salisbury Road
Suite 305
Jacksonville, FL 32216

1.800.434.8881

[email protected]

Linkedin Twitter

© 2021 SUNTECKtts, A MODE Global Company / Terms of Service / Terms of Credit / Privacy Statement /  Mexico Privacy / Cookie Policy / Website Terms & Conditions / Human Rights Policy