Training Tuesday:Consistency

There are a million sales tips and “tricks” out there designed to help you become a better salesperson, but you may find the biggest key to long term success is consistency. You must be consistent – create a routine of practicing your sales presentation, prospecting, maintaining relationships with existing clients, and pitching to potential customers. If you do not do these things regularly, you can’t guarantee that you will have reliable sales numbers.

If you can consistently practice your sales presentation, you can make the presentation itself more consistent based on what works in real sales situations and you can continue to fine tune it. If you don’t practice and instead rely on charisma and “winging it,” you cannot necessarily reproduce an effective sales pitch. Without a dependable sales presentation, the level of success you can expect from a prospect in a sales interaction varies widely.

Having a steady sales pipeline also relies on consistent prospecting and interactions with existing customers. If you don’t spend ample time each day or week prospecting, it doesn’t matter how stellar your sales presentation is, because you won’t have a potential customer to share it with. You must also maintain relationships with your existing customers, both to help prevent them from leaving for the competition and to increase your chances of successful referrals to their contacts who may need your services.

Consistency is key – that may be a cliché, but it certainly applies to sales. It is crucial that you put in reliable work and effort in order to create and maintain a steady rate of sales success.

0 comments

LTL 101:Unexpected Charges for LTL Loads

It is important to educate shippers and consignees so they know what to expect at the time of pick-up and delivery, but it is equally as important to remind them of potential unexpected charges and things to watch out for when shipping an LTL load.

Did you know that many customers get invoiced at a much higher rate due to their shipments being “hit” with Cubic Capacity, Exceeds Linear Feet, or Oversize Dims? All three of these things are different and very expensive so pay close attention to what your customer is shipping.

Cubic Capacity
This is when a shipment is greater than 750 cubic feet and an average density of 6 or less (some carriers are 4 or less).

  • Example of a Cubic Capacity load:
    • 6 Pallets at 2600 lbs., each pallet is 48x48x55, cubic feet is 768, and the density is only 5.91
  • This shipment would get “hit” with cubic capacity without a quote.

Linear Foot Rule
Each carrier has their own version of the linear foot rule. If your shipment equals more than the LTL linear foot rule for that carrier then it will get “hit” with the “exceeds linear feet” fee.

  • Example of Linear Foot load:
    • 5 pallets at 5000 lbs., each pallet is 49x49x50, and because the pallets cannot be placed side by side this shipment takes up a little more than 20’ of space

Oversize
Each carrier has an over dimension rule; most LTL carriers are 12′. The oversize accessorial should be applied to any shipment 12’ or more. You can find the “Linear Foot Rule” for most carriers by looking at their carrier tariff on their websites.

0 comments

LTL 101:Pick-Up and Delivery Tips

Pick-Ups:

  • Any pick-up (P/U) entered after 2:30 PM local time should be called into the carrier to insure availability, otherwise the request will roll over to the next day
  • Lift Gate P/Us must be called into the carriers because Lift Gates are not readily available at every terminal
  • All Container Freight Stations and Airline P/Us require Delivery Order and Entry paperwork (3416 document), these need to be sent 24 hours in advance because drivers will need these documents in hand prior to P/U
  • P/Us are not Guaranteed
  • All carriers require a 2 hour window for P/Us
  • P/Us are done in the afternoon because drivers have to deliver freight before they can start pickups
    • If your shipper needs an AM P/U it is best practice to call the carrier to set something up which will most likely incur additional charges
  • The shipper must have our system generated BOL to provide to the driver at the time of P/U or our rates will not apply
    • This is not something the carrier will have via our P/U requests in BTMS
  • If an LTL driver needs to reference a P/U number, it is best practice to put that number on the first line of the shipper name. Please see the example below:

           ABC Distribution Co > Ref # 123456

           4567 Main Street

           Anywhere, NY 10014

Deliveries: 

  • Transit times and delivery dates are estimations and can be delayed for many reasons
    • Add an additional day if a shipment is interlined
    • Add 2-3 days if a shipment is traveling by rail
  • Stress to your customers, if the shipment must be delivered by a certain date and time, spend the extra money and have a the shipment guaranteed
    • If “Guaranteed” is not on the BOL at time of P/U no adjustments can be made to the invoice
  • Volume Shipments cannot be Expedited or Guaranteed
  •  Re-delivery Rates are based on weight and can get very pricey

It is imperative to make sure the consignee is ready to accept the freight so that additional charges are not incurred

0 comments

LTL 101:Educating Consignees

It is very important to educate your consignee BEFORE the freight is delivered about what the process will be like. Will they need a liftgate? Will the driver be helping unload the freight in any form or manner? By asking these questions in advance, and by making sure that the consignee and you are on the same page, you can minimize additional charges on your invoice.

On the delivery receipt/proof of delivery (POD), issues should be notated if you suspect that the value of the product has been compromised. Make sure to notate any damage to the packaging, and/or missing product. Having these notes on the POD makes it easier to file a freight claim with the carrier. Claims can take quite a long time so anything that you can do upfront saves time down the road.

Another tactic you can take is to refuse the shipment upon delivery if damage is present. Refusing a shipment means that the consignee does not accept the freight in the condition presented – meaning you will eventually file a damage claim. This will alert the carrier that something is wrong with the shipment and that they should get in touch with the appropriate party. Make sure you use this tactic responsibly, because if a shipment is not damaged the carrier can actually tack on a redelivery fee. Yikes!  

Five of the most common additional services on a POD include:

  1. Lift Gate – Hydraulic lift on the rear of a truck used to assist in the unloading of freight.
  2. Inside Delivery – The driver is only responsible for moving the freight off the truck. If the driver helps move the freight more than a few feet away from the truck, even if it’s not “inside,” then an Inside Delivery fee may apply. Be very careful with this one because the terminology can be misleading and it varies by carrier.
  3. Limited Access (Residential) – This is up to the carrier’s discretion, however, there are locations that will always be deemed limited access. If a business is run from a home, or is in a residential area, carriers may charge this fee.
  4. Sort/Segregate – Certain locations may require a carrier to sort and segregate a shipment. This is additional handling beyond the normal duties of a driver that will incur additional fee(s). This charge is especially prevalent in grocery stores or distribution centers.
  5. Detention – With most LTL carriers, the first 30 minutes from when the driver arrives are free. Any additional time is subject to an additional detention fee. Again, the length of this “free time” as well as the charge for it varies by carrier.

So the next time you sign a POD when receiving your shipment, be sure to review it and see if any additional services listed are being used. If a service is pre-printed on the POD, then the need for this service was most likely known in advance. However, if the driver marks that an additional service was performed, then there will be an additional charge. In some cases, it may be good practice to have your consignee obtain a copy of the POD themselves.

0 comments

LTL 101:Drop Trailers Overview

From time to time you may run into a drop trailer with one of your LTL shipments.

A drop trailer is a trailer that is left at a location for an indeterminate amount of time. It’s “dropped,” and picked up later. Most of the time, a drop trailer is used at locations that ship or receive often enough to fill up or unload a full trailer in a week or even a day, depending on production. The location doesn’t matter as much as the amount of freight that is moving in or out of the specified location and the agreement in place with each LTL carrier.

Think about it like this: Let’s say you have a shipment going to a warehouse that multiple manufactures ship to as well. This warehouse has pre-established relationships with a handful of LTL carriers. In order to save time and money they will consolidate and reduce traffic flow to their receiving docks by collaborating with LTL carriers and advise them to only “drop” a trailer at their location when the LTL carrier has a full trailer. This could potentially delay your expected delivery date.

There are numerous ways in which the LTL carriers can handle a drop trailer situation, but the main thing to keep in mind is that your shipment may not deliver on time due to it being a drop trailer which may also change the way in which the PODs are received from the consignee. Due to the nature of drop trailers, PODs are usually handled differently and will almost always take longer to receive considering the consignee is unloading a full trailer of shipments from multiple shippers.

Though the use of drop trailers isn’t exactly common, it’s not something to be afraid of when it comes to your LTL shipments. A little understanding goes a long way. Here are some things to keep in mind when dealing with drop trailers:

Drop trailers can sometimes lead to delays. Before you panic about delays, remember that the manufacturer is often very aware a drop trailer is being used, and so should the buyer. Don’t be afraid to ask if the shipper or consignee have any drop trailer processes in place so you can educate your customer as well. Most drop trailer situations do not revolve around freight that is time-sensitive. If your freight is on a tight schedule, make sure to use a different carrier.

Not all carriers do drop trailers. Just because one carrier uses a drop trailer at a certain location doesn’t mean that EVERY carrier uses a drop trailer there. Trailers belong to carriers, so if you can’t afford to have a drop trailer on a shipment, simply look at using a different carrier. It may not be the cheapest of the bunch, but there will always be options available.

Stay away from perishables. For obvious reasons, if you’re shipping perishable items, make sure you’re not dealing with drop trailers.

0 comments

Training Tuesday:Sales Pitching and Silence

Often the most important part of your sales pitch is when you are completely silent. We often rush through all the great benefits of why a customer would buy, without really listening to them tell us what they need and why they might buy from us.

Most people hate mimes. Why do they exist? Are they evil? If a tree falls on a mime does he make a sound? But, silence is the one important sales attribute that mimes demonstrate in abundance. So, on your next sales call, be a mime, at least for part of the call. Silence just may turn out to be the most important piece of the sales puzzle.

Why is it that so many salespeople think they must tell everything they know before allowing the prospect to talk? Why is it that some think the sales process involves a lot of talking when, in reality, the most successful salespeople do more listening than talking? It’s a fact that the more we listen, the more we can learn about our prospects and the easier we can find their “hot buttons.”  It’s not what we say that makes the sale, it’s what we can get the prospect to say.

Begin With Questions

Think about how many times you launch right into your presentation thinking you know what the prospect wants. Sometime later, often too much later, you find you’re on the wrong track. The prospect has an entirely different need – one you might have uncovered by asking open-ended questions that required more than a yes or no response. Then you could have focused on what the customer wanted instead of what you had to sell. Stop thinking so much about what you are going to say and concentrate on what the prospect is telling you.

It’s a paradox: the more we try to tell the prospect up front, the more barriers we create to the purchase. However, the more we listen to why he or she wants to buy, the more we can tailor our delivery to providing very specific information concerning how our product or service fits his or her needs.

Ask More Questions

The opening question is merely the first in a series of questions that guide the dialogue. It’s an approach as old as the art of miming. If we want to involve someone – the first step in convincing that person – every comment we make should end with a question that solicits more information. The person asking questions is the person controlling the direction of the dialogue. The one who is talking is providing information that helps the other adjust the direction.

After you ask a question, however, don’t be too anxious to fill the silence. Let the silence work in your favor. Too often we answer the question for the prospect by jumping in and providing him with an objection:

“Perhaps you don’t like the price,” or, “Maybe you don’t like the resources it would involve.”

Beware of the very real temptation to fill in the silence with a product weakness – the one we are most worried about.

Don’t Rush In With Answers

Salespeople have a terrible tendency to try to get their point in as soon as the customer stops talking. Think about how often you find yourself stepping on your prospect’s last words, rushing in right after the prospect has finished making a point.

Salespeople can break themselves of this self-defeating habit by training themselves to wait several seconds after the customer has stopped talking before they begin. That gives you ample time to think about your response and answer in a way that reflects the customer’s concerns.

Get in the habit of paraphrasing what the prospect has said. This will accomplish two things. One, it reduces the likelihood of misunderstanding what was said, and two, it boosts the prospect’s ego. People like to hear their thoughts repeated – it makes them feel like what they said was important.

Learn to Listen

Don’t listen with just with your ears. Listen with your eyes and your entire body. Use body language that shows you are paying more attention, and your listening habits will automatically improve. Lean forward intently, look the prospect in the eye, and focus on the valuable information you are hearing.

And finally, listen for buying signals. You’ll never notice a buying signal from the customer when you’re doing the talking. Sure, we want to talk so the prospect will learn how smart we are. But the prospect only really knows how smart we are when we’ve “listened” to the information he or she wants to share.

0 comments

Training Tuesday:Dress Rehearsals

Practice is essential to increasing success on sales calls, and one excellent way to practice is to have a “dress rehearsal” with a coworker or trusted peer. There are certain things you can do to make the role-playing situation the most helpful preparation for the sales call.

  • Set a clear objective. Setting a defined objective for what you want to get out of the practice call, what skills you’d like to improve, and what you’ll have as a goal in a similar real call.
  • If you’re role-playing with a mentor, have them model the skills you’d like to work on in that session. You can also try to model the individual skills you’d like to work on, and then practice putting them all together in a full simulated situation.
  • Remove the fear of failure. Role-playing helps remove the fear of failure in the real-life situation by creating a space to practice various techniques. If a method doesn’t work, you can then use the role-play situation to workshop what went wrong and how to change it. This allows you to fail and learn from it without jeopardizing a sale or relationship with a customer.
  • Role playing can also be helpful in the role of observer or customer, because you are able to see how various techniques play out and what it’s like to be on the other side of the sale. It can help you to identify what you’d like change about your current sales presentation – either by offering new techniques to incorporate or showing you what doesn’t work and should be removed.
  • You can also provide and receive open, objective, and constructive feedback from your partner in the role-play exercise. This feedback is an essential part of the process, and a huge benefit of role-playing and “dress rehearsals”
0 comments

LTL 101:DOT Hazmat Rules

The U. S. Department of Transportation (DOT) has specific rules for shipping hazardous materials. SunteckTTS can help you determine the DOT hazardous class for your shipment and find contract freight carriers that meet DOT safety and transportation requirements.

Hazardous materials are defined by the U. S. Department of Transportation in accordance with the Federal Hazardous Material Law regulations. A DOT hazardous material classification is applied if a material, in a particular amount and form, poses an unreasonable risk to health, safety or property.

Below is the list of DOT hazard classes:

DOT Hazard Class 1: Explosives.

Division 1.1: Explosives with a mass explosion hazard
Division 1.2: Explosives with a projection hazard
Division 1.3: Explosives with predominantly a fire hazard
Division 1.4: Explosives with no significant blast hazard
Division 1.5: Very insensitive explosives
Division 1.6: Extremely insensitive explosive articles

 

DOT Hazard Class 2: Gases.

Division 2.1: Flammable gases
Division 2.2: Non-flammable gases
Division 2.3: Poison gases
Division 2.4: Corrosive gases

 

DOT Hazard Class 3: Flammable liquids.

Division 3.1: Flashpoint below -18°C(0°F)
Division 3.2: Flashpoint below -18°C and above, but less than 23°C(73°F)
Division 3.3: Flashpoint 23°C and up to 61°C(141°F)

 

DOT Hazard Class 4: Flammable solids, spontaneously combustible materials, and materials that are dangerous when wet.

Division 4.1: Flammable solids
Division 4.2: Spontaneously combustible materials
Division 4.3: Materials that are dangerous when wet

 

DOT Hazard Class 5: Oxidizers and organic peroxides.

Division 5.1: Oxidizers
Division 5.2: Organic peroxides

 

DOT Hazard Class 6: Poisons and etiologic materials.

Division 6.1: Poisonous materials
Division 6.2: Etiologic (infectious) materials

 

DOT Hazard Class 7: Radioactive material.

Any material, or combination of materials, that spontaneously gives off ionizing radiation. It has a specific activity greater than 0.002 microcopies per gram.

 

DOT Hazard Class 8: Corrosives.

A material, liquid or solid, that causes visible destruction or irreversible alteration to human skin or a liquid that has a severe corrosion rate on steel or aluminum.

 

DOT Hazard Class 9: Miscellaneous dangerous substances and articles.

A material that presents a hazard during transport, but which is not included in another hazardous freight classification.

 

ORM-D: Other regulated material.

A material that, although otherwise subjected to regulations, presents a limited hazard during transportation due to its form, quantity and packaging.

 

In order to avoid any issues while booking HAZMAT loads please contact your local SunteckTTS agent so that they can insure your BOL is set up correctly and you have classified your hazardous materials properly with the correct UN Number, Shipping Name, Description, Group, Class and Placard Type.

0 comments

Training Tuesday:More Tips for Managing Stress

Last week we addressed ten of our top tips for reducing stress and the negative effects that long lasting stress can have on success. Reducing stress is an important life skill involving techniques that take only minutes to learn, but a lifetime to master. This year, make it a point to work on managing your stress in healthy ways.

Below are ten more tips on reducing stress and improving general happiness and success:

11.Figure out the source of your stress. Focus on whether or not it’s your fault and if so, whether there is anything you can do about it.

12.Talk to people who work in similar jobs – it doesn’t necessarily have to be transportation sales, but preferably someone in outside sales.

13.Talk to someone who will help you develop an objective perspective of your situation. It can be someone at work you trust, a friend, or a professional.

14.Find something that makes you laugh. Hold onto it and pull it out when you need a good laugh.

15.Spend more time with people who make you laugh. Get together with co-workers regularly to share funny stories about daily disasters with an eye towards constructive solutions.

16.Smile more. Smiling is a great way to reduce stress and improve confidence and feelings of happiness.

17.Eat healthy. When we’re under stress, our bodies use up nutrients faster and less efficiently than they ordinarily do. Give yourself a boost by opting for healthier foods, increasing intake of vitamins and proteins, and reducing fats, caffeine, and sugar.

18.Stick to a regular sleep schedule.

19.Write down what you expect to accomplish and then get it done.

20.Start your day prepared. If any one factor will relieve more stress than another, it’s preparation.

Embracing even just a few of the ideas that we’ve mentioned is a great way to work towards reduced stress, greater happiness, and improved success.

0 comments

Training Tuesday:Managing Stress

Training Tuesday: Stress Management to Improve Success

Selling offers more highs and lows than most other professions. Most salespeople suffer through periods of stress that are direct results of their sales jobs, but salespeople who succeed in the long run never let disappointments get the best of them. They know rejection goes with the territory and learn not to take it personally and instead, they view mistakes and failures as lessons that will help them improve. On the other hand, some very promising sales careers have died premature deaths due to stress. Stress sometimes causes sales people to lose confidence and then fill their day with nonessential activities and hide from their customers or prospects. We’re also faced with lots of rejection on our daily search for success. If you dwell on the negatives, they’ll bury you. You have to lighten up and look for ways to lessen the stress caused by your job. The start of the new year is a perfect time to star working on habits that will help you manage stress and increase your success in the coming year.

Below are 10 of our top tips to reduce stress:

1. Focus. Focus on what’s truly stressful to you about a situation and why – the idea being that understanding the stress lessens it and gives you some control over it.

2. Put stressful situations in perspective.

3. Postpone thinking about problems until an appropriate time. Successful people learn how to compartmentalize their thinking.

4. Take a deep breath. Size up stressful situations and decide which are worth worrying about.

5. Take vacations and occasional time off. 

6. Don’t be afraid to laugh at yourself.

7. Talk to others about job pressures.

8. Expect the unexpected. Allow time and reserve energy to deal with the inevitable stressful events that occur daily.

9. Do something for yourself.

10. Volunteer or do something in the community that is rewarding to you.

 

We’ll be addressing some additional tips to manage stress next week!

0 comments