LTL 101:Cubic Capacity

Do you know how Cubic Capacity can affect your shipments?

Almost every carrier we utilize through our LTL platforms has a cubic capacity rule in their rules tariff that may affect any of your shipments. LTL carriers impose minimum cubic capacity rules to effectively counter very light, fluffy shipments that take up more than their fair share of a trailer.  In most cases, LTL carriers state that if a shipment consumes 750 cubic ft. of space     or more, AND the shipment has a density of less than 6 pounds per cubic foot (pcf), it’s not paying its fair share.  While the rule varies dramatically amongst carriers, most artificially adjust the weight to a minimum of 6 pcf, AND apply a class of 125 or 150 to the commodities being shipped with their associated tariff rates.  Most carriers use the 750 cubic feet as the threshold, but not all.

This week we wanted to clarify what to watch for with Cubic Capacity by providing an example from XPO:

XPO is now enforcing their standard cubic capacity rules on all tariffs. What this means is that shipments requiring 350 cubic ft. or more of the trailer with an average density of less than 3 pcf will have the weight calculated differently then what the actual weight is. Yes that is correct, the actual weight will not matter!

350 cubic ft. of the trailer equates to approximately 5.46 linear ft. of the trailer so you can see that we are severely limited on the amount of skids of LTL we can ship when the density is below 3 pcf.

As an example, for two pallets of LTL, cubic capacity would be calculated as follows.  Please note that the carrier uses the actual height (96”) of the trailer when they look at the cubic capacity of the shipment, not the actual height that the shipment might be:

One skid = (40” x 43” x 96”) / 1726 cubic inches per cubic ft. = 95.67 cubic ft. x two skids = 193.34 cubic ft.

You can see that this falls way under the 350 cubic ft. rule so we are safe to ship this with XPO.

However, if you want to ship 4 skids, the cube of the shipment is now double at 386.68 cubic ft. which is outside of the cubic capacity limit. The only way you could ship this as an LTL shipment is if the density of the shipment was greater than 3 pcf.

Four skids with a total weight of 500 lbs., the density would be the 500 lbs. / 386.68 cubic ft. = 1.3 pcf. 

If we shipped this LTL, we would be hit with the cubic capacity rule and our cost would skyrocket.

Four skids would have to have a total weight of 1161 lbs. or greater for us to be able to ship them as a standard LTL shipment with no problems. 1161 lbs./386.68 = 3.0 pcf.

Below is the actual excerpt from the XPO rules tariff:

rules tarriff
0 comments

LTL 101:Limited Access Charges

Limited access charges were created to compensate LTL carriers for additional time spent at your shipment’s pick up or delivery locations and constraints that can result from these specific locations. Limited access is defined as meeting any of the following conditions:

  • Not open to the walk-in public during normal business hours
  • Not having personnel readily available to assist with the delivery or pickup function
  • Not having access to loading dock or platform
  • Sites where carriers are delayed with security related inspections and processes prior to freight tender

Did you know: Some of these high security locations will ask for a driver’s license and drivers have the right to refuse to do so? This causes the carrier to find a driver who is willing to do so, which in turn causes a domino effect or constraint on the daily operations of that particular terminal.

In order to avoid unexpected charges, it is best practice to ask the consignee if they have a dock or way to unload the freight and ask them if they need a liftgate for delivery. Liftgates are commonly associated with limited access and if the consignee advises they don’t need a liftgate, let them know that if the driver offers a liftgate and it is used OR signed for even without being used, there will be an additional fee that will be charged to them.

Limited access fees can be assessed on both commercial and non-commercial delivery sites. Charges and what constitutes as a limited access will vary based on carrier, but here are some of the most common examples:

  • Camps, Carnivals, Fairs
  • Churches, Mosques, Synagogues, Temples
  • Schools (not including colleges and universities)
  • Colleges and Universities without a dock
  • Medical/Urgent care sites without a dock
  • Prisons
  • Individual / Mini Storage Units
  • Mines, Quarries, Natural Gas or Oil Fields
  • Golf Courses, Country Clubs
  • Nuclear Power Plants
  • Military Bases/Installations
  • Parks, Farms and Rural locations
  • Courthouses
  • Daycares
  • Hotels, Motels, Retirement/Nursing Homes
  • Restaurants
  • Cemeteries
  • Convents
  • Amusement Parks
  • Construction Sites
  • Outdoor Flea Markets
Camps, Carnivals, FairsChurches, Mosques, Synagogues, TemplesSchools (not including colleges and universities)Colleges and Universities without a dockMedical/Urgent care sites without a dockPrisonsIndividual / Mini Storage UnitsMines, Quarries, Natural Gas or Oil FieldsGolf Courses, Country ClubsNuclear Power PlantsMilitary Bases/InstallationsParks, Farms and Rural locationsCourthousesDaycaresHotels, Motels, Retirement/Nursing HomesRestaurantsCemeteriesConventsAmusement ParksConstruction SitesOutdoor Flea Markets

Google Maps is a great tool that can be used to help explain whether or not a location has limited access. However, please keep in mind that even though the location is easy to get in and out of, and they may have the necessary equipment to unload, they may still be considered limited access. Some great examples of this are as follows:

  • Farms: While they are easy to get to and have equipment, they usually take the driver off his/her usual route which causes delays for the other shipments on the trailer
  • Mini Storage Units: The driver will have to use a smaller trailer with or without a liftgate and thus make fewer deliveries that day because of the space available on the trailer, so the charges are there to compensate
    • Carriers normally have fewer trailers with liftgates which makes this even more difficult when the volume of limited access or liftgate shipments goes up

Keep in mind: Commercial buildings with docks are normally clustered in the same area, a carrier can easily make multiple pickups or deliveries in a business park in the same time it may take to make one limited access delivery.

0 comments

Training Tuesday:Being a Confirmer

Being a successful salesperson requires a lot of practice, being able to envision making a sales call that results in sales success. Confirming the sale requires a lot of confidence and belief that you can make the sale and help the customer. The confidence you demonstrate when talking with a customer about our ability to deliver the service they need has the effect of transferring that confidence to them.

In the transportation industry, a lot of credit is given to a salesperson who is a proven closer. That has always been my reputation – a guy who always asks for the sale and expects the customer to say “YES.” Being known as a “Closer” is a big compliment. The only downside is the negative connotation of being a “closer,” when it is more accurate to call it “confirming the sale.”

Whatever you decide to call it – there’s no magic to confirming the sale. Right from the initial approach to the very end of your presentation, bit by bit, you should be confirming the sale. It’s when you find out if you did your job properly, but by following your instincts and confirming the sale throughout the process then the customer will let you know when it’s time to close the sale.

Closing or confirming the sale should be the most natural thing about selling. It’s the only reason for your job and it should become automatic. Don’t hesitate to ask a shipper for his or her business. The only time you shouldn’t be outwardly confirming the sale is when you’re on the fact-finding call, and even then, there will be a series of opportunities for minor closes that prepare your prospect for your next sales call.

You must have complete confidence in your ability to close the sale, if not, the prospect becomes consumed with doubt. The prospect can sense when it’s time for you to confirm the sale, and it’s up to you to ask for the order. They knew you were a salesperson when they agreed to see you, and if you lack confidence to ask for his business, they’re going to lack confidence in making a decision.

Confirming the sale is simply demonstrating a confidence that you’re ready to provide the prospect with the service they want and need. When the prospect feels comfortable with you in this regard, it’s time to say, “Okay, when are we going to handle your first shipment?”

0 comments

LTL 101:Density Based Rules and Price

Density is very important in selecting freight class. One carrier that rates solely on density of an item is Central Transport. Some carriers will rate based on density if the commodities’ National Motor Freight Classification (NMFC) is a density based item. Three carriers that do this are Midwest Motor Express, UPS, and Saia.

With these NMFC density based rating carriers the general rule is anything under 48 inches high will be calculated as 48 inches and anything over 48 inches but under 96 inches will be calculated as 96 inches for density purposes.

Please see the actual wording from one of the carrier’s rules tariff below:

So how could this affect your shipment?

Say you were shipping 1 pallet of sheet steel, or NMFC 175120, which is a density based item.
• The dimensions are 144” L x 45” W x 18” H
• The total weight is 550lbs.
• This equates to 8.1 PCF & Class 100
o In turn, sub 6 would be selected for this NMFC (175120-6)

However, if you change the dimensions based on the carrier’s rules tariff above, you now have the following:
• The dimensions are 144” L x 45” W x 48” H
• The total weight is 550lbs.
• This equates to 3.1 PCF & Class 250
o In turn, sub 3 would be selected for this NMFC (175120-3)

DUE TO THE HIGHER CLASS OF FREIGHT
THE PRICE WILL GO UP SUBSTANTIALLY!

0 comments

LTL 101:Delivery Appointments vs Notifications

This blog we will discuss the difference between an appointment and a notify before delivery.

Delivery Appointments:

  • Appointments cannot be set until the freight arrives at the destination terminal.
  • Contact must be made with the consignee to deliver.
    • LTL Carriers will always make appointments, we cannot make the appointments for them. However, if they cannot get a hold of the consignee we may assist them.
    • We can’t stress enough how important it is to contact the consignee even if they are not your customer in order to understand their appointment process.
    • It is best practice to then get with the carrier to insure they are not having trouble setting up an appointment and causing further delays.
      • It is not the carrier’s responsibility to understand every consignee’s appointment process.

A great example of the above is Grocery Warehouses: If the carrier needs to book an appointment online or reference PO#s in order to get the freight delivered then we need to put this info as clear and concise as possible on the BOL. This info must be entered on the “special instructions” section under the carrier tab in BTMS.

  • Appointments can sometimes delay transit by 1-2 days with the freight sitting on the dock.
    • Don’t forget that LTL drivers depart from their terminals early in the morning and if an appointment cannot be set prior to their trailers being loaded, your freight will be left behind.
    • Regardless if “THE FREIGHT MUST DELIVER TODAY” the drivers will not go back to the terminal once they have dispatched for the day.
  • A few things to keep in mind with appointments:
    • Specific delivery windows can cause a driver to take an inefficient route which has a domino effect on all shipments for that day.
    • Some consignees may have Drop Trailer schedules set up with certain carriers.
    • Some consignees may have standing appointments set up with certain carriers.

 

Notify Before Delivery:

  • Your shipment does not have to deliver at a specified time and may arrive any time between the standard LTL hours of 8am and 5pm local time.
  • This is typically used when shipping to residences, storage facilities, or even businesses with limited dock space.
  • Drivers do not call ahead to the shipping location. This is done by a dispatcher or clerk at the destination terminal and sometimes even at the corporate offices of the LTL carrier.
  • This can cause a delay in transit while the freight sits on the dock until the consignee can be notified.
    • Due to the high amount of volume in LTL and depending on the size of the terminal, there could be multiple, even hundreds of shipments that need to be notified for the day.
    • If the consignee cannot be reached on the due date of delivery after multiple attempts, it is highly possible that the freight will be held at the terminal until contact can be made.

 

Remember: If you’re looking to set up a Delivery Appointment you’ll need to select that particular service. But if you’re just looking for a “head’s up,” then Notify Consignee is the accessorial you’re looking for.

0 comments

Training Tuesday:First Impressions

There are too many freight sales reps in the U.S. today to even come up with an accurate number. It is important for your prospect to know about your qualifications. Tell the prospect about yourself. No grandstanding or patting yourself on the back, just an informative look at your career and the customers you’ve helped. It lets the prospect know that they’re dealing with a professional.

If I know beforehand that the prospect knows little about my company, and nothing about me, I sometimes send over a short bio-sketch and a few magazine or newspaper articles that discuss the company or were written by me. I provide something tangible to the prospect that adds a new dimension to the relationship. Rather than simply sending them a brochure, I personalize it, and at the same time the articles express something about me and my philosophy on transportation.

In the transportation business there are two kinds of sales people: those who add value to the client’s traffic department, and those who seem to mishandle every shipment or transaction their company is involved in. Let the customer know early on that you fall into the first category.

Of course, when the moment of truth arrives, you’ll have to find the best way to make a good first impression. Take into consideration the particular dynamics of your prospect’s age, position, and gender in comparison with your own. Accommodate and welcome the differences.

Every prospect will react differently to what you have to say. Some prospects will give you all the time in the world, while others believe making time for a meeting threatens a crisis. Some are skeptical, while others are freethinkers who pride themselves on being open to new ideas. The point is you can’t win everyone over with a single script designed to handle the first few minutes.

Making a first impression requires a bit of work, but it is an essential part of the sales process and worth the effort.

0 comments

SUNTECKTTS ACQUIRESHA LOGISTICS

October 9, 2018 – Jacksonville, Fla. – SunteckTTS, a leading provider of agent‐based, technology-driven transportation logistics services, today announced that it has acquired HA Logistics, a California-based freight brokerage and logistics company with full-service sales and support operations in San Ramon, CA, Ontario, CA, Columbus, OH, Dallas, TX, Rohnert Park, CA and Seattle, WA.

Established in 1984, HA Logistics has built an extensive offering of transportation services and solutions for its customers throughout North America. Alan Huttmann will continue as President of HA Logistics.

“We are pleased to be the latest addition to the SunteckTTS organization,” said Huttmann. “This move represents a great opportunity to expand our client service offering and remove obstacles to efficiency by utilizing SunteckTTS’ technology and transportation solutions. Joining SunteckTTS further enables our team to provide customized solutions to our customers.”

“HA Logistics has shown remarkable growth and is an excellent fit to help accelerate our company’s expansion,” said Ken Forster, Chief Executive Officer of SunteckTTS. “Further, this acquisition will drive growth and profitability by combining our technology-enabled transportation solutions with HA Logistics’ experienced sales and operations team members. ”

Ranked the 9th largest freight brokerage in the U.S. by Transport Topics, SunteckTTS continues its growth through technology expansion and strategic M&A.

About SunteckTTS

SunteckTTS delivers technology-driven transportation logistics services and solutions to shippers through a network of sales, operations, and capacity agents utilizing a dynamic, proprietary, cloud-based technology platform that enables customized shipper and capacity coordination in an accelerated environment. Through our network of over 200 freight agents, SunteckTTS is an industry leader with a base of over 10,000 customers and 32,000 partner carriers. In 2017, Transport Topics ranked SunteckTTS as the 9th largest freight brokerage firm in the U.S.

About HA Logistics

Privately held with the corporate office in San Ramon, California and key locations across the U.S., the company provides a one-stop source for all supply chain needs. Known for its commitment to customer service, HA Logistics delivers transportations solutions including truckload, LTL, intermodal/rail, refrigerated services and more.

# # #

If you would like more information about this topic, please contact Kristen Williams at (904) 570-3473 or email at [email protected]

0 comments

LTL 101:NMFC Transportability Characteristics

Remember the National Motor Freight Classification® (NMFC®) is a standard that provides a comparison of commodities moving in interstate, intrastate and foreign commerce. Commodities are grouped into one of 18 classes—from a low of class 50 to a high of class 500—based on an evaluation of four transportation characteristics: density, stow-ability, handling, and liability. Together, these characteristics establish a commodity’s “transportability.”

These characteristics can be defined as follows:

  1. Density (Weight, Length, & Height): Density is the space the item occupies in relation to its weight. The density is calculated by dividing the weight of the item in pounds by its volume in cubic feet. Your item’s volume in cubic feet is Length x Width x Height/1,728, where all dimensions are measured in inches. The density of your item = Weight/Volume, where Weight is measured in pounds and Volume is measured in cubic feet.
  2. Stow-ability: Most freight stows well in trucks, trains and boats, but some articles are regulated by the government or carrier policies. Some items cannot be loaded together. Hazardous materials are transported in specific manners. Excessive weight, length or protrusions can make freight impossible to load with other freight. The absence of load-bearing surfaces makes freight impossible to stack. A quantifiable stow-ability classification represents the difficulty in loading and carrying these items.
  3. Handling: Most freight is loaded with mechanical equipment and poses no handling difficulties, but some freight, due to weight, shape, fragility or hazardous properties, requires special attention. A classification that represents ease or difficulty of loading and carrying the freight is assigned to the items.
  4. Liability: Liability is probability of freight theft or damage, or damage to adjacent freight. Perishable cargo or cargo prone to spontaneous combustion or explosion is classified based on liability and assigned a value per pound, which is a fraction of the carrier’s liability. When classification is based on liability, density must also be considered.

Sub-NMFC Codes

Yes, there is more! There are also Sub-NMFC codes which are noted with a dash after the code (i.e. 41024-04). Make sure to confirm that the Sub-NMFC code matches the correct freight class. Carriers sometimes overlook this, but it’s also not uncommon for them to charge you at the higher class; whether it be the class that was listed, or the class corresponding to the Sub-NMFC codes on the BOL. These can often be disputed, but usually require a manufacturer’s specification sheet and a packing list proving the correct class. That’s more work for all parties and can be avoided by simply double-checking to make sure your class and NMFC code match.

Don’t forget we are participants of the National Motor Freight Traffic Association which means we have access to multiple ways of obtaining the correct NMFC number/code for your shipments. If you have any questions or doubts regarding your product’s freight class, please reach out to the LTL Team.

0 comments

Training Tuesday:Making Appointments

There are several things a salesperson should do before making an actual face-to-face presentation. Obviously, an appointment must be made with the prospect. Also, the salesperson must be qualified to make the sales call, meaning that they must have acquired the necessary product knowledge, are properly prepared to answer all industry-related questions, and possess a basic understanding of the customer’s needs. Effective time management is essential to achieve the maximum number of sales presentations each day.

Poor appointment setting habits can ruin a productive sales week. Appointment scheduling and general office work should not be performed during prime selling time. Broken appointments, however, create an opportunity to set appointments for the following week.

When setting appointments, always consider the characteristics of your territory to ensure you are able to make the most sales presentations possible in a day. Too much windshield time kills your earning potential. Remember, your goal should always be more sales presentations and less wasted time and energy.

Before you pick up the telephone, you should have in your possession the following information: the decision maker’s name, title (purchasing manager, traffic manager, material control manager, warehouse supervisor, etc), address, phone number, and information on how you obtained the lead. A qualified prospect is anybody who ships or receives freight or makes those decisions for other locations. If you received this lead from a referral, be sure to have your source’s name ready to cite to the prospect.

Never call a prospect without knowing his or her name in advance. You can call a day or two in advance to ask the main receptionist the name of the purchasing VP or whomever you’d like to connect with, and then call back later to the specific individual. You can also search the internet for the needed information.

Your only objective for a cold call is to schedule an appointment. Never attempt to sell at this stage, instead aim to set up a time for the prospect to hear your presentation.  Sound important and confident, but not pushy. Be persistent, but polite, and always be well-prepared with answers to the most common questions about why they should meet with you.

Much of this part of the process is about how you see and carry yourself. The decisions your prospects make on who they will trust to ship the products they manufacture is one of the most important decisions they make. Be persistent. Make sure they get the opportunity to enjoy the benefits that only you can sell them.

0 comments

Training Tuesday– Sales Questions

Asking questions that turn into sales is an extremely important part of the sales business. You must pay attention to the needs of your client, spot subtle buying signals, know when to foster an open dialogue, and know what questions to ask.

One of the most critical elements to a successful sales call is asking good sales questions. Prior to every sales call or customer meeting, it’s a good idea to think through and write down a list of twelve to fifteen sales questions you want to ask a potential customer during the meeting. You may not get the opportunity to ask all of them, but you must be prepared to get as much information as possible.

Below is a list of generic, consultative sales questions to get you started. Building greater levels of prospect trust, more quickly, is the best way to increase your selling success. Asking your prospects well-thought-out questions is one of the key ways to build prospect trust.

These sales questions are not in any specific order – choose the questions that best fit your sales situation.

1.How do you manage your transportation needs today?

2.What are the disadvantages of the way you’re handling this process now?

3.What are the key deadlines?

4.What are the most important elements that keep your organization functioning?

5.What are your greatest challenges?

6.What benefits might result if we tried the following approach?

7.What can I do at this point to better serve you?

8.What concerns do you have?

9.What could get in the way of getting an agreement made?

10.What criteria would you use to choose a replacement transportation provider?

11.What details do you want explained?

12.What do you see as the greatest risks in making this decision?

13.What do you see as the primary benefits of our solutions? Do you see any other potential benefits?

14.What do you want to happen that isn’t happening now?

15.What does it take to be successful in your position?

16.What else do we need to discuss?

17.What expectations do you have for me in returning your phone calls, emails, etc? how quickly would you typically expect me to respond?

18.What is important to you about making a change at this time? Have you considered or tried to make a change in the past? What stopped you from considering a new transportation solution last time?

19.What is your company’s annual sales volume?

20.What is your expected outcome for our meeting today?

Hopefully these investigative questions will help you solve the mystery of sales success.

0 comments